User's Manual

16
SMCD3GNV4 and SMCD3GNV4E Wireless EMTA Gateway Administrator Manual
Configuring an Apple® Macintosh® Computer
The following procedure describes how to configure TCP/IP on an Apple Macintosh running Mac OS
10.2. If your Apple Macintosh is running Mac OS 7.x or later, the steps you perform and the screens you
see may differ slightly from the following. However, you should still be able to use this procedure as a
guide to configuring your Apple Macintosh for TCP/IP.
1. Pull down the Apple Menu, click System Preferences, and select Network.
2. Verify that NIC connected to the Gateway is selected in the Show field.
3. In the Configure field on the TCP/IP tab, select Using DHCP (see Figure 10).
4. Click Apply Now to apply your settings and close the TCP/IP dialog box.
Figure 10. Selecting Using DHCP in the Configure Field