User's Manual

5
SMCD3GNV4 and SMCD3GNV4E Wireless EMTA Gateway Administrator Manual
Rear Panel
The rear panel of the Gateway contains a reset button and ports for attaching the supplied power cord
and making other connections. Figure 2 shows the rear panel components and Table 3 describes them.
Figure 2. Rear View of the Gateway
Table 3. Gateway Rear Panel Components
Item Symbol Meaning Description
n
Phone Connect the a telephone set to the Gateway
o
Alarm Connect the Gateway to the phone line outlet.
p
Ethernet 1-4 Four 10/100/1000 auto-sensing RJ-45 switch ports. Connect devices on your local-area network, such
as a computer, hub, or switch, to these ports.
q
USB 3-4 This Gateway provides four USB 2.0 host ports, two (USB3-4) on the rear panel and two (USB1-2) on
the Expansion Slot on the bottom of the Gateway. Use these ports to connect to USB printers, hard
drives, and other peripherals.
r
Reset Use this button to reboot the Gateway or restore the default factory settings (see Chapter 6 “Resetting
and Rebooting the Gateway”). This button is recessed to prevent accidental resets of your Gateway.
s
Cable Connect your coaxial cable line to this port.
t
Power Connect the supplied power adapter to this port.
u
ON/OFF Switch Turns the Gateway ON or OFF.
ξ = Press to turn ON the Gateway.
μ = Press to turn OFF the Gateway.
n o
p q r
s
t
u