User's Manual

4
SMCD3GNV4 and SMCD3GNV4E Wireless EMTA Gateway Administrator Manual
Table 1. Top Panel LEDs
Symbol LED Description
Power ON = power is supplied to the Gateway
OFF = power is not supplied to the Gateway
DS Blinking = scanning for DS channel
ON = ranged on one or more channels
US Blinking = ranging is in progress
ON = ranging is complete on 1 channel only
OFF = scanning for DS channel
Online Blinking = cable interface is acquiring IP, ToD, CM configuration
ON = Gateway is operational
OFF = Gateway is offline
Wi-Fi Blinking = data is transmitting
ON = Wi-Fi is enabled
OFF = Wi-Fi is disabled
PHONE 1/2 Blinking = phone set off-hook
ON = phone set on-hook
LEDs on rear panel
Link Green/Amber blinking = data is transmitting
Green ON = connected at 1 Gbps.
Amber ON = connected at 10 or 100 Mbps
OFF = no Ethernet link detected
Front Panel Push Button
Table 2. Front Panel Push Button
Symbol Function Type Description
WPS Button Press this button to establish a wireless connection between the Gateway and a WPS-enabled
client (see “Configuring WPS Settings” on page 41).