User's Manual

113
SMCD3GNV4 and SMCD3GNV4E Wireless EMTA Gateway Administrator Manual
Appendix A - Wall-Mounting the Gateway
The Gateway can be mounted on a wall. Wall mounting requires hanging the Gateway along its width or
length using the three slots on the bottom of the unit and the Gateway mounting template (on the next
page) for the screws.
WARNING: The Gateway should be wall mounted to concrete or plaster-wall-board. Before
drilling holes, check the structure for potential damage to water, gas, or electric lines.
To mount your Gateway on the wall:
1. Print the 1:1 wall-mounting template on the next page at 100% scale. Set page scaling to [None]
(100%). Do not reduce or enlarge the scale of the template.