User's Manual

102
SMCD3GNV4 and SMCD3GNV4E Wireless EMTA Gateway Administrator Manual
MSO Screens
The last menu in the right pane is MSO Screen. This menu contains configuration pages that
administrators will find helpful when managing the Gateway. Most of the pages are read-only, although
some let you configure Gateway settings.
The MSO screens are:
y Basic HW Info – shows basic hardware information about the cable modem. See page 103.
y Event Log – shows the entries in the Gateway’s event log. See page 104.
y CM State – shows the Gateway’s cable modem state and associated information. See page 105.
y Basic Wan Status – shows RF downstream, RF upstream, and RF status statistics. See page 106.
y Product Detail – shows the Gateway’s cable modem and WAN status. See page 107.
y DHCP – shows software version/provisioning mode, cable modem DHCP parameters, DHCP cable
modem status, and MTA DHCP parameters. See page 108.
y MTA – shows error codewords and enterprise Management Information Bases (MIBs), and lets you
initiate GR909 tests. See page 109.
y Telnet/SSN – enables or disables Telnet and SSH requests and displays Telnet and SSH
information. See page 111.
y System Config – enables or disables the Gateway’s wireless functions. See page 112.
To return to the previous set of menus and submenus, click Gateway WEB in the left pane. The right
pane also has a Logout link that exits you from the Web management interface.