- SMC Cable Owners Manual

ManualsBrandsSMC Networks ManualsNetwork CardCable

(203) 776-2813 • FAX (203) 776-8294

APPLIED ENGINEERING PRODUCTS

www.aepconnectors.com • aepsales@aepconnectors.com

SMC Cable Attachment Methods

All SMC cable connectors in this catalog have captivated contacts which are soldered to the

cable center conductor.

Both crimp and clamp types for ﬂexible cable grip the cable braid with a force greater than

the breaking strength of the braid.

Summary of content (8 pages)

PAGE 1
SMC Cable Attachment Methods All SMC cable connectors in this catalog have captivated contacts which are soldered to the cable center conductor. Both crimp and clamp types for flexible cable grip the cable braid with a force greater than the breaking strength of the braid. APPLIED ENGINEERING PRODUCTS (203) 776-2813 • FAX (203) 776-8294 www.aepconnectors.com • aepsales@aepconnectors.
PAGE 2
SMC Cable Plugs Click on part number to go directly to cable assembly instructions Straight Plugs Right Angle Plugs Substitute the appropriate cable group number for “XX” when ordering: GROUP 02 03 CABLE TYPES RG178, RG196, M17/93, M17/169 RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/189 GROUP CABLE TYPES 05 RG178DS, RG196DS 09 .141" semi-rigid, RG 402M17/130 APPLIED ENGINEERING PRODUCTS (203) 776-2813 • FAX (203) 776-8294 GROUP 10 19 CABLE TYPES .
PAGE 3
SMC Cable Jacks Click on part number to go directly to cable assembly instructions Straight Jacks Right Angle Jacks Substitute the appropriate cable group number for “XX” when ordering: GROUP 02 03 CABLE TYPES RG178, RG196, M17/93, M17/169 RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/189 GROUP CABLE TYPES 05 RG178DS, RG196DS 09 .141" semi-rigid, RG 402M17/130 APPLIED ENGINEERING PRODUCTS (203) 776-2813 • FAX (203) 776-8294 GROUP 10 19 CABLE TYPES .
PAGE 4
SMC Bulkhead Mounted Cable Jacks Click on part number to go directly to cable assembly instructions Straight Jacks Right Angle Jacks Substitute the appropriate cable group number for “XX” when ordering: GROUP 02 03 CABLE TYPES RG178, RG196, M17/93, M17/169 RG174, RG179, RG316, M17/113, M17/119, M17/172, M17/189 GROUP CABLE TYPES 05 RG178DS, RG196DS 09 .141" semi-rigid, RG 402M17/130 APPLIED ENGINEERING PRODUCTS (203) 776-2813 • FAX (203) 776-8294 GROUP 10 19 CABLE TYPES .
PAGE 5
Cable Assembly Instructions Clamp type connectors for flexible cable Straight Connectors—Flexible Cable Right Angle Connectors—Flexible Cable Parts list Insulator Body assembly Insulator Ferrule Compression washer Cap Ferrule Compression washer Body assembly Parts list Backnut Backnut Contact (male or female) 1 1 —Trim cable per trim code below; tin end of center conductor. —Slide backnut onto cable.
PAGE 6
Cable Assembly Instructions Crimp type connectors for flexible cable Straight Connectors—Flexible Cable Right Angle Connectors—Flexible Cable Parts list Backnut/crimp tail Body assembly Insulator Heat-shrink tubing Cap (optional) Insulator Heat-shrink tubing (optional) Body assembly Parts list Crimp sleeve Crimp sleeve Contact (male or female) 1 1 —Trim cable per trim code below; tin end of center conductor. —Slide heat-shrink tubing and crimp sleeve over cable.
PAGE 7
Cable Assembly Instructions Solder-clamp connectors for semi-rigid cable Straight Connectors—Semi-Rigid Cable Parts list Solder Ferrule Insulator Body assembly Right Angle Connectors—Semi-Rigid Cable Solder Ferrule Cap Backnut Insulator Backnut Body assembly Parts list Contact (male or female) 1 1 Solder Solder —Trim cable per trim code below; tin end of center conductor. —Slide backnut over cable. Slide solder ferrule over cable until it stops against cable jacket.
PAGE 8
Mounting Dimensions Bulkhead Receptacles P.C. Board Receptacles .195 dia. .100 typ. .180 .200 typ. .047 dia. Flat of mounting surface is aligned with body hex as shown. .067 dia. min. (typ.) Assembly Tooling Crimp tool DESCRIPTION Crimp tool with .105" and .