Network Router User Manual

C HAPTER 6 | Network Settings
WAN Setting
– 58 –
PPPOE Enables the Mini 3G Broadband Router IP address to be assigned
automatically from an Internet service provider (ISP) through a DSL
modem using Point-to-Point Protocol over Ethernet (PPPoE).
Figure 28: PPPoE Configuration
The following items are displayed on this page:
◆ PPPoE User Name — Sets the PPPoE user name for the WAN port.
(Default: pppoe_user; Range: 1~32 characters)
◆ PPPoE Password — Sets a PPPoE password for the WAN port.
(Default: pppoe_password; Range: 1~32 characters)
◆ Verify Password — Prompts you to re-enter your chosen password.
◆ Operation Mode — Selects the operation mode as Keep Alive, On
Demand or Manual. (Default: Keep Alive)
■
Keep Alive Mode: The Mini 3G Broadband Router will periodically
check your Internet connection and automatically re-establish your
connection when disconnected. (Default: 60 seconds)
■
On Demand Mode: The maximum length of inactive time the unit
will stay connected to the DSL service provider before
disconnecting. (Default: 5 minutes)