User's Manual

HAPTER

| Firewall Configuration

MAC/IP/Port Filtering

– 92 –

Figure 47: MAC/IP/Port Filtering

◆ MAC/IP/Port Filtering — Enables or disables MAC/IP/Port Filtering.

(Default: Disable)

◆ Default Policy — When MAC/IP/Port Filtering is enabled, the default

policy will be enabled. If you set the default policy to “Dropped”, all

incoming packets that don’t match the rules will be dropped. If the

policy is set to "Accepted," all incoming packets that don't match the

rules are accepted. (Default: Dropped)

◆ MAC Address — Specifies the MAC address to block or allow traffic

from.

◆ Destination IP Address — Specifies the destination IP address to

block or allow traffic from.