- SMC Broadband Router User Guide

8.3 | PPTP/ L2TP configuration example

Pease note that the virtual address of the L2TP and PPTP server have to be

different.

PPTP

• Step 1: Go to the PPTP Server section and select the Enable radio button

• Step 2: Change the virtual IP value if necessary (this is the IP network that your

PPTP clients will automatically be connected to)

• Step 3: Set the authentication protocol

• Step 4: Enter a tunnel name and set the username and password

• Step 5: Configure your remote VPN client to connect to the WAN IP of the router

L2TP

Microsoft uses an embedded L2TP/IPSEC VPN implementation. In order to use the Microsoft

standard VPN client, one has to disable the IPSEC on the PC. Please refer to Microsoft help

to perform this operation.

• Step 1: Go to the L2TP Server section and select the Enable radio button

• Step 2: Change the virtual IP value if necessary (this is the IP network that your

L2TP clients will automatically be connected to)

• Step 3: Set the authentication protocol

• Step 4: Enter a tunnel name and set the username and password

• Step 5: Configure your remote VPN client to connect to the WAN IP of the router