User's Manual

錯誤! 尚未定義樣式。
59
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Adding Predefined Filters
The Gateway lets you select traffic you want to block from the LAN to the Internet.
1. In the Access Control menu, check Enable Access Control if it is not checked and click
the Apply button. The remaining fields in the menu become available.
2. Under Predefined Filtering Table, click the Add button. The Predefined Filter menu
appears (see Figure 34).
3. Complete the fields in the Predefined Filter menu (see Table 15).
4. Click Apply. (Or click Back to return to the Access Control menu or Cancel to cancel any
selections you made.) If you clicked Apply, the predefined filter is added to the Predefined
Filtering Table on the Access Control menu.
5. To define additional filters for access control (up to 35, including customer-defined filters),
repeat steps 1 through 4. When you finish, click Apply in the Access Control menu to save
your settings.
6. To change the settings for a predefined filter, click the radio button to the left of the service
in the Predefined Filtering Table and click the Edit button. When the Predefined Filter
menu appears, edit the settings as necessary (see Table 15) and click Apply. Click Apply
in the Access Control menu to save your settings.
7. To delete a predefined filter, click the radio button to the left of the filter in the Predefined
Filtering Table and click the Delete button. No precautionary message appears before
you delete a predefined filter. Click Apply in the Access Control menu to save your
settings.
Figure 34. Predefined Filter Menu