User's Manual

錯誤! 尚未定義樣式。
56
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Table 14. Customer Defined Service Page Options
Option Description
Name Name for identifying the custom service. The name is for reference purposes only and should let you
identify this service from others you may define.
Type Type of protocol. Choices are:
• TCP (default)
• UDP
• TCP/UDP
LAN Server IP Enter the last two octets of the IP address of the LAN PC or server running the service.
Remote IPs Select any remote IP address, a single remote IP address, or a range of remote IP addresses for the
defined service.
Start IP If Remote IPs is set to Single address or Address Range, enter the starting IP address of the service.
End IP If Remote IPs is set to Address Range, enter the last octet in the ending IP address of the service.
Public IP Ports A single public IP port or a range of public IP ports on which the service is provided. If necessary, contact
the application vendor for this information.
Start Public Port Starting number of the port on which the service is provided.
End Public Port If Start Public Port is set to Port Range, enter the ending number of the port on which the service is
provided.
Private Ports Numbers of the ports whose traffic the Gateway forwards to the LAN. If there is a range of ports, enter the
starting private port here and check Enable Port Range. The Gateway automatically calculates the end
private port. The LAN PC server listens for traffic/data on this port (or these ports).