Owners Manual Hub/Switch 16 10BASE-T, 100BASE-TX

Configuring the Switch
3-6
3
Input Trunk Configuration Sets the input rate limit for each trunk 3-81
Output Port Configuration Sets the output rate limit for each port 3-81
Output Trunk Configuration Sets the output rate limit for each trunk 3-81
Port Statistics Lists Ethernet and RMON port statistics 3-82
Address Table 3-86
Static Addresses Displays entries for interface, address or VLAN 3-86
Dynamic Addresses Displays or edits static entries in the Address Table 3-87
Address Aging Sets timeout for dynamically learned entries 3-89
Spanning Tree 3-89
STA
Information Displays STA values used for the bridge 3-90
Configuration Configures global bridge settings for STA and RSTP 3-93
Port Information Displays individual port settings for STA 3-96
Trunk Information Displays individual trunk settings for STA 3-96
Port Configuration Configures individual port settings for STA 3-99
Trunk Configuration Configures individual trunk settings for STA 3-99
VLAN 3-101
802.1Q VLAN
GVRP Status Enables GVRP VLAN registration protocol 3-104
Basic Information Displays information on the VLAN type supported by this switch 3-104
Current Table Shows the current port members of each VLAN and whether or
not the port is tagged or untagged
3-105
Static List Used to create or remove VLAN groups 3-107
Static Table Modifies the settings for an existing VLAN 3-108
Static Membership by Port Configures membership type for interfaces, including tagged,
untagged or forbidden
3-110
Port Configuration Specifies default PVID and VLAN attributes 3-111
Trunk Configuration Specifies default trunk VID and VLAN attributes 3-111
Private VLAN 3-113
Information Displays Private VLAN feature information 3-114
Configuration This page is used to create/remove primary or community
VLANs
3-115
Association Each community VLAN must be associated with a primary VLAN 3-116
Table 3-2. Main Menu (Continued)
Menu Description Page