Operation Manual

G-Sensor setting

If G-sensor sensitivity

value is high (8 or 9), it

may be too sensitive, it

will detect even a light

impact or light turn. If G-

sensor sensitivity value

is a low setting (1 or 2),

it might not detect a

notable incident.

Sensitivity should be set

in consideration of a

vehicle‟s suspension and

also the road condition.

[BX1000] doesn‟t have

the GPS time sync.

function. So please click

the manual time setting,

and set your time before

installing it in your car.

[BX1000+] has an internal GPS supporting the automatic GPS Time

Synchronize function. The time recording is done based on UTC at the

BX1000+ and automatically converts to the local time at the PC according to

the PC time zone setting when playing back using the PC Viewer.

If you use a NEW SD Memory card, initializing must be done first.

STEP1. Insert new SD memory card into

the PC.

STEP2. Run “PC Viewer BX1500”

STEP3. Select [ ] record setting or [ ] setting viewer program

and then click [Init SD card]

We recommend the [Init SD card] at least once per month to reduce the

possibility of any software errors.

Drive Recorder Settings

130.com.ua

Autogood products «130»