User Guide

15SMARTWITNESS KP2 USER GUIDE
INSTALLATION
RESOURCES
WARNING:
SmartWitness installations should be performed by a qualified individual or installation professional only.
Working with a vehicle’s power system can be dangerous to both you and your vehicle. This installation
is intended only to be a guide since vehicle designs and power/input sources can vary
significantly from vehicle to vehicle.
If you need to schedule a professional installation service in the USA for your SmartWitness
device(s), please visit https://smartwitness.com/scheduleinstall and submit the online form.
Please follow the links below for access to KP2 installation materials. The Installation Video
and Quick Start Guide feature self-installations that require additional power adapter
accessories. The Installation Guide is designed for professional 3-wire installation.
DISTRACTION DETECTED
KP2
PRO
INSTALLATION
GUIDE
Version 4.0
Last updated 4/06/20 22
Download
KP2 Pro Installation Guide
3. Watch the installation vi deo. 2. Scan the QR code inside th e box
for a detailed insta llation video, spec
sheet and user guid e.
5. Remove backing. Press eve nly
to ensure adhesive is flush a gainst
the glass. Hold unit to win dow for
30 seconds.
8. Connect KP2 bracket ca ble to
your preferred power ad apter. For
this install, let ’s use an OBDII.
6. Remove adhesive and ap ply cable
clips to windshield. S lide the bracket
power cable into clips .
7. Tuck cable behin d weather stripping,
and push strippi ng in to secure it.
Proceed to next page for
device calibration >
12. Open the KP2 inst allation app, and
scan the IMEI code on th e box’s label.
10. Turn on your vehicle. Check
that both blue and gre en lights
remain on after 5 minu tes. If not,
an error occurred.
13. Follow the device configu ration
prompts to complete the installation
app.
1. Review the package contents.
Standard Kit includes:
QUICK START INSTALLATION GUIDE
FOR KP2 VIDEO TELEMATICS CAMERA
A.
B.
C.
9. Plug the end of the OB DII adapter
cable into your vehicle’s OB DII port.
11. Scan the QR code abo ve, and
download the iOS or A ndroid KP2
installation ap p.
4. Ensure there are no chips or crack s
in windshield. Use w ipe to clean the
window. Allow time to dr y. Remove
any film left over from so lution.
D.
E.
F.
A. KP2 Camera
B. Windsh ield Mounting
Bracket & 3M
™
Adhesive Tape
C. Alcohol Pads
D. Clips
E. Torx
®
Wrench
F. Cable (OBDII A dapter
sold separately)
Use the appropriate QR co de to
download the KP2 In stallation App
Download
Quick Start Guide
Access KP2 Installation App
Watch
KP2 Installation Video