KP2 USER GUIDE DRIVER FATIGUE Please read this entire guide and refer to our installation materials before using your KP2. Version 2.0.
KP2 USER GUIDE DRIVER FATIGUE TABLE OF CONTENTS Please read this entire guide before installation and use. PACKAGE CONTENTS .................................................................... 3 DRIVER SAFETY WARNINGS ...................................................... 11 OPTIONAL ACCESSORIES .............................................................4 GPS RECEPTION ........................................................................... 12 GET TO KNOW THE KP2 .................................
PACKAGE CONTENTS KP2 Vehicle Recorder Power Cable 1 From Bracket Removable Wedge Block (Driver-Facing Camera Ordered Separately) Torx® Wrench *64GB SD Card (Pre-Installed) Power Cable 2 (3-Wire Type) Square Adhesive Cable Clips (x5) Nano SIM Card (Pre-Installed) (One Adhered to Bracket, One Extra Pc.
OPTIONAL ACCESSORIES At SmartWitness, we give our Partners multiple options when selecting their preferred power application and camera configuration. The items mentioned below are compatible with the KP2 and offer different benefits or trade-offs when employed with your device. For more details on prices and ordering options, please contact your SmartWitness Account Manager or email us at sales.usa@smartwitness.com.
GET TO KNOW THE KP2 Camera Lens FRONT Lens Angle Lock Windshield Bracket SIDE Unscrew the right-side bracket. Remove the KP2 from the bracket to adjust camera angle or insert/remove SIM/SD card. Applied screws for design purpose only.
GET TO KNOW THE KP2 SIDE COVER OPEN Release Tab Nano SIM Slot (4FF) Micro SD Card Slot Memory SD Card Slot 2nd Camera (Model: KP2-DFC) BACK Ecall/Panic Button Bluetooth Pairing Button LED Types: Warning LED (RED) Record LED (BLUE) Network LED (GREEN) SMARTWITNESS KP2 USER GUIDE 6
KEY FUNCTIONS Automatic Booting Once you’ve wired your KP2 to the vehicle’s power source, the KP2 will turn on and begin recording after about 30 seconds. 1. VIDEO RECORDING Continuous Record This is the default mode for recording. Your KP2 begins recording after booting up and continues to record the entire time the device is on. In this mode, the SD card storage may fill up quicker and overwrite your oldest recordings when it’s full.
KEY FUNCTIONS 3. BLUETOOTH® PANIC BUTTON Please get in touch with SmartWitness or your supplier to buy a Bluetooth panic button for your KP2. Enable Pairing To enable Bluetooth pairing for your panic button, set Bluetooth Panic as “Flic“ in your KP2 Configuration Tool. Your Bluetooth panic button won’t work if you don’t turn this setting on. How to Pair With the KP2 Red LED = Warning, Blue LED = Record, Green LED = Pairing Confirmation 1. 2. 3. 4. 5. Press BT button.
ADAS FUNCTIONS Your KP2’s Automatic Driver Assist System (ADAS) features allow drivers to receive in-cabin preventive audio alerts in cases of potential incidents. Pedestrian Collision Warning A pedestrian is in forward proximity of your vehicle, and an imminent collision is possible. Forward Collision Warning Your vehicle is likely to collide with something in front of the vehicle. Headway Monitoring Warning Your vehicle is not maintaining a safe distance with the vehicle in front of you (tailgating).
DSM FUNCTIONS Your KP2’s Driver State Monitoring (DSM) functions allow drivers to receive audible alerts for driver distraction, fatigue or negligence. The following DSM events are configurable in your KP2: DSW DFW Driver Smoking Warning (DSW) Driver is smoking in the vehicle. Driver Fatigue Warning (DFW) Driver is yawning and/or has prolonged eyelid closure. DPUW DDW Driver Phone Use Warning (DPUW) Driver is holding a phone up to their ear.
DRIVER SAFETY WARNINGS DISCLAIMER The KP2 is not a substitute for a safe, conscientious driver. The KP2 cannot compensate for a driver who is distracted, inattentive or impaired by fatigue, drugs or alcohol. Whether or not the KP2 is in use, it is always the driver’s responsibility to take appropriate corrective action. It does not eliminate or decrease the need for a driver to stay alert and obey all traffic laws while operating a vehicle.
GPS RECEPTION When satellites don’t have line of sight, cellular towers help triangulate a vehicle’s location. IMPROVE YOUR SIGNAL 1. Activate your KP2 in an area without large buildings. 2. The optimum operating temperature for your vehicle’s GPS is -10°C~50°C 3. When first using your KP2 or turning it on after a period (>3 days), allow more time to recognize your current location. RECEPTION MAY BE IMPAIRED: 1. If there is an object at the end of the GPS antenna 2.
LED & BUZZER SPECIFICATIONS LED Warning Status/Step Red Startup & Power Off Off - Booting Step 2 On On and Off Off - Booting Step 3 On On On and Off - Booting Finished On On On - Power Off Off Fast Simultaneous On and Off Continuous Record Off Off Off - Recording - On - - Standby - On - - Recording - Fast On and Off - - - On - - Event Recording - Fast On and Off - - - Off - - 4G LTE Network Device Ready - - On - Communication - - On - SD For
TECHNICAL SPECIFICATIONS NAME VALUE Image Sensor 2 Megapixel CMOS Sensor Gyro 3 Axis (X, Y, Z), Output Rate: 100Hz Main, Road-Facing Camera (Forward-Facing): 140° (115°(H), 60°(V)) Time GPS Time Sync + Built-In Real-Time Clock (RTC) 2nd Camera (Optional, Driver-Facing): 130° (104°(H) x 56°(V)) Speaker LTE CAT6 (KP2-NA): B2/B4/B5/B7/B12/B13/ B14/B17/B25/B26/B41/B66/B71 Audible Alerts for Events and Audio for ADAS and DSM.
INSTALLATION RESOURCES Please follow the links below for access to KP2 installation materials. The Installation Video and Quick Start Guide feature self-installations that require additional power adapter accessories. The Installation Guide is designed for professional 3-wire installation. QUICK START INSTALLATION GUIDE FOR KP2 VIDEO TELEMATICS CAMERA Standard Kit includes: Use the appropriate QR code to download the KP2 Installation App E. A. A. KP2 Camera C. B. B.
CONFIGURATION TOOL & GUIDE KP2 CONFIGURATION TOOL The KP2 Configuration Tool allows you to further customize your KP2 device settings. If you wish to make specific calibration changes, please follow this link to download the software. To learn more about each section of the configuration tool, please read the walk-through outlined in the KP2 Configuration Guide. PC REQUIREMENTS Recommended settings for optimal configuration tool compatibility: OS Windows 7/8/8.1/10 or Higher CPU Core 2 Duo 2.
SD VIEWER SOFTWARE & USER GUIDE SD VIEWER SOFTWARE SmartWitness’ SD Viewer Software gives you access to enhanced video playback, editing and review. Please follow this link to download the software. To understand the core functions of the software, please adhere to the walk-through outlined in the SD Viewer User Guide. PC REQUIREMENTS Recommended settings for optimal SD Viewer Software compatibility: OS Windows 7/8/8.1/10 or Higher CPU Core 2 Duo 2.
TECHNICAL SUPPORT & WARRANTY TECHNICAL SUPPORT For technical support, please contact your local distributor or visit our Support Portal and submit a support ticket. You can also email us at support@smartwitness.com or call our support team: North America, South America, APAC +1 (312) 981-8774 EMEA +44 (0) 1483 397005 HAAS AND LIMITED WARRANTY If you are under our Hardware-as-a-Service (HaaS) Warranty, please follow this link to understand the coverage of your subscription.
SAFETY ADVICE & FCC REGULATIONS FCC Part 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.
FOR MORE INFORMATION, CONTACT NAME HERE (phone number here) | (email address here) © 2022 SmartWitness. All Rights Reserved.
