operation manual

NETWORK

SETUP

Setup Network Connection and Security Code (remote

access):

‧

Static IP – if you are using xed IP address, please

obtain and enter the IP information provided by your

local ISP.

‧

DHCP – if you are using dynamic IP address, simply

select DHCP and there is no need to enter any

additional IP address information.

Setup your security code to limit who can have access

to your security data. Up to 12 characters

of number and

alphabet can be allowed.

Tap "OK" to save the setting and exit.

The Network Connection status will be

displayed on the

view screen via the following

icons:

Network Connection is normal

No Network Connection available.

Please make sure the WDVR840S

receiver is

connected to the router via the

Ethernet

cable provided. Abnormal Network

Connection.

SYSTEM INFO &

UPGRADE

Display System information:

‧ WDVR840S Receiver Firmware Version

‧ WDVR840S Camera 1/2/3/4 Firmware Version

System ID

‧ DID

‧ Security Code

‧ Internet IP & Server

System Upgrade:

‧

Click on screen any location to begin

system upgrade

process