operation manual

15
5. Connect the 12V power adaptor and power on the system for further system setup or operation.
The power indicator will light up.
6. Turn on TV/monitor and switch to proper HDMI input source.
3. Connect the Ethernet cable from the BACK of the console to your router. In order to having live-
view video from your WDVR840S anywhere in the world on your 4G/Wi-Fi enable smart devices.
You will need to connect WDVR840S to the home router with an Ethernet cable.
4. Connect HDMI cable from the device to TV/monitor HDMI connector.
HD
ON / OFF
RESET
Connect the system directly after the router. Do not connect the system
to router through a hub or witcher. Enable DHCP and UPnP on your router.
TCP port #6000 and #80 should be opened.
Internet
Mobile Device
Router
Note:
‧ If you want to use a HDMI cable of your own, make sure the quality is good.
Performance and compatibility may vary depending on cables and TV brands.
‧ Please use TV remote controller to adjust Audio/Alarm volume.
‧ Please use TV remote controller to fine tune the camera color satuarion/brightness/
sharpness, ect. Camera image performance may vary among TV brands.
*Make sure the TV supports 720P/50Hz