Operation Manual
3 | Adding a new device Smartwares
6 SW360 app instruction manual
– Note (for Android): The GPS location of your smartphone should be enabled dur-
ing the process of adding a device. It is needed to determine the time zone. The
GPS function can be disabled again after adding a device.
– Note: When the installation was not successful, please use the reset button on the
camera to reset the camera and try again.
3.1 Sharing a camera
Illustration4: Opening the share
function.
You can to share the live feed from your camera with a family member or a friend.
They will be able to view live footage, but aren’t allowed to view recordings or change
the camera settings.
ü You have installed the SW360 app and have added one or more cameras to your
account.
ü You have a friend or family member who has also installed the SW360 app on their
smartphone.
a) Open the SW360 app.
b) Tap the three dots next to the name of the camera that you wish to share. A QR
code will now appear on your screen.
The person who wishes to share your camera should now follow the instructions be-
low:
a) Open the SW360 app.
b) Tap the + button to start the process of adding a new camera to your account.
c) Tap “Scan”. The SW360 app will now access your camera.
d) Point your camera at the QR code on the screen of the other smartphone. The
SW360 app will now automatically scan the code and add the camera.
ð Your friend or family member will now be able to access the live view from your
camera.