User manual

The two indoor-monitors contact two oudoor-cameras.
Total line long
25m
30m
Recommend wire
RVV 4 x 0.2mm
RVV 4 x 0.3mm
2
2
Operation
1.Outside calling
2.Intercom(on stand by status)
5
The indoor-monitor will be shut off automatically when no answer
from calling. under the instance of more outdoor-camera, the use
of one the others will be shut off.
After installation, the calling button should be pressed once so that
the indoor-monitor can recognize the outdoor-camera.
Pick up the handset, intercom starts; hang up the handset,
intercom close or it will close automatically after 60seconds.
Press the monitor button one time, intercom starts;
Press the button second time:
a).if two or more outdoor-cameras are connected, indoor-monitor
will monitor another outdoor-camera;
b).If only one outdoor-camera is connected, the intercom close or
it will close automatically after 60 seconds.
NOTE:
When two indoor-monitors have a internal call, other indoor-monitor's button
are unable to be operated , and there are no videos on their LCD screen until
the internal call is finished.
6
3.Monitor
For example: last time of calling is P1 outdoor-camera, to
continue press the monitor key, the outdoor-camera of switch
sequence as below.
NOTICE:
1.the outdoor-camera must has difference of address code.
2.first use the product, the outdoor-camera will call the indoor-monitor one
time, so that indoor-monitor can discern difference code of outdoor-camera.
P1-P4:outdoor-camera of code(address code)
P1 P2 P3 P4
4.Unlock
1.Just can open the lock under the conversation or in the
condition of monitor.
2.Only can open lock when outdoor-camera is working.
3.The lock .should match with the type of outdoor-camera
Model
Unlock way
OFF OFF
ON
12V
0V
Unlock
Lock
OFF
ON
12V
0V
ON
Unlock
Lock
OFF
ON
Unlock
Lock
0s
0s
0s
4~7s
4~7s
4~7s
Code
P1 P2
P3
P4
product model
product address No.
open lock type
PXXXX
The indoor-monitor of inspection has two kind:
1. single outdoor-camera
press the monitor key after, the indoor-monitor's screen switch to
scout fettle ,press again, return to hold on calling fettle.
Hold on
Scout
2.more outdoor-camera
the outdoor-camera connect more outdoor-camera, hold on
calling that press the monitor key, the system default the scout
last time. finally calling that the outdoor-camera is pressed,
then it can switching each other in more outdoor-camera.
Hold on