Networking Machine Installation and Operation Manual (M222A )
Notice Contents Brief Introduction............................................................. 1 Function.......................................................................... 1 Keys Introduction............................................................. 1 Installs the foundation...................................................... 2 Wiring diagram of indoor monitor....................................... 3 Function setting................................................................
Installs the foundation 1 About 145cm 1 90mm Thanks for your support to our products. To aim at the market request, we designed the Multi-intercom unit for Mono building which is made on the basis of our basic intercom, it is conformitied and optimized on function & performance, the performance is more stable besides of the basic function. this products extend the design for basic intercom ,simple installation ,safe and conve -nient use.
Networking diagram wiring diagram of indoor-monitor CAMERA 1 A 2 3 4 M4 POWER DC 15V The part of back of Indoor-monitor 1 Yellow(Video) 2 Black(GND) 3 Red(VDD) 4 White(Audio) M2 M3 Function setting Lum adjustment The brightness is divided into seven divisions, press the key to increase or decrease the brightness gradually M1 Contrast adjustment The contrast is divided into seven divisions, press the key to increase or decrease the contrast gradually Chrominance adjustment The chrominance i
3.Monitor The indoor-monitor of inspection has two kind: 1. single outdoor-camera press the monitor key after, the indoor-monitor's screen switch to scout fettle ,press again, return to hold on calling fettle. Hold on 2.more outdoor-camera the outdoor-camera connect more outdoor-camera, hold on calling that press the monitor key, the system default the scout last time. finally calling that the outdoor-camera is pressed, then it can switching each other in more outdoor-camera.
12V 0V OFF ON Unlock OFFLock Lock 12V ON ON OFF 0V Unlock OFF ON Lock Unlock The positive lock which no adaptor, was supplied power by outdoor-camera , when the gate is closed, the circuit voltage is 0V, when opens the door, puts through the power source, the voltage is 12V, may judge automatically whether time delay 4~7s or not time delay The positive lock which no adaptor, was supplied power by outdoor-camera, when the gate is closed, the circuit voltage is 12V, when opens the door, puts through the
