Quick Start Guide

1. The alarm panel’s built in microphone can record your message.
Enter on the alarm panel.
2. When rn es green clearly say a brief alert message into the microphone.
3. When lightnel will play back the alert message.
Note: Included accessories are pre-binded with the alarm panel at
the factory.
1. Test communicaon link by pressing Disarm on the remote
2. Red indicator on the remote will light along with a long beep at the
panel.
1. RFID tags can disarm the system.
2. Arm the system using remote control, check ARM icon lights up
3. Hold the RFID tag near the panelr arming the system.
4. A long beep followed by the Disarm indicator light will display.
5. Several RFID tags can be added and each can have a t
number.
1. Put the alarm panel to test mode by :
The icon wi
len in this mode.
2. Press and release the tamper switch inside the PIR ue
panel makes a chime sound.
3. Place the rear cover back on the PIR.
1. Leave the system in Test Mode
2. Press and release the tamper switch on the back of the sensor
l makes a chime sound.
With the HA788GSM App you can have remote access to the GSM alarm system from your
smartphone. You can set your alarm system to Arm/Psarm easily and receive alert
messages on your smartphone when events occur.
1. From Google Play/ Apple Store, search for ‘Everspring GSM Alarm System’ App and install it.
2. Create a new system by selecng a name, then enter the phone number of the SIM card you
inserted inside the panel.
3. Select the newly created system from the home screen ( gure D)
4. Then click on the status bu to know the current status of the system. (gure E)
5. Aend system status via SMS will appear. Sel
ect it. (ure F)
6. An SMS will be sent to the host’s (owners) cellphonee G)
D E F G
Ste
p
7 – Tesn
g
the PIR moon sensor
Step 9 – Smartphone App Setup
Ste
p
4 – Record an Alert voice messa
g
e
Ste
p
5 – Test the remote control
Ste
p
6 – Test the RFID ke
y
ta
g
Ste
p
8 – Test the door
/
window contact
1234
1234
03
Important : If the siren goes off me during the set up, press the
Disarm be remote to immediately ture siren
Important: Make sure you’re installing the App on the same phone you used in Step 2.