Quick Start Guide

A
B C
HA788GSM
Quickstart Guide GB
Congrons on your purchase of the HA788GSM Alarm system. You have just purchased one
of the most advanced and feature rich wireless security systems on the market today.
We recommended you go through the User's Instructions to fully understand the system and
plan your instf you wish to set up the system immediately, please read this guide rst.
This quickstart guide describes the basic steps to install your HA788GSM Alarm System (alarm
panel, window sensors,nsor and RFID keychain transmitter).
ALARM PANEL OVERVIEW
A. Touch keypad D. RFID sensor area Gery cover
B. Microphone E. GSM status led H. Wall moung bracket
C. Siren F. Speaker
1. Remove bover of the alarm panel.
2. Insert the SIM card into the slot and connect the 9V
power adapter.
Note: SIM card needs to be unlocked before use. You can
use a mobile phone to cancel the input of PIN code or PUK
code.
3. Wait un the GSM
status led blinks slowly (once every 3
seconds) implying the SIM card is ready for use.
1. Install baeries in the included accessories.
2. Open the PIR rear cover and insert the b (Figure A)
3. Twist open the ba cover of the remote control and insert thee.
(Figure B). Replace the cover and press any key to ensure the red LED on the remote light up
4. Open the door/ window contact baery cover and insert the 3 baeries (Figure C)
1. urthe defarcode ‘1234’
(example: 1234 + 66 + + 09 5555 1212 + )
2. You will receive an SMS message saying phone number set successfully.
3. Your alarm panel can now be controlled from the smartphone app (Step 9).
Ste
p
1 – Power on and SIM Card Installaon
Ste
p
3 – Seng up the GSM host number
Ste
p
2 – Insert the baies
66
Owner’s
Phone number
1234