Operation Manual

8
3. INSTALLING AND PROGRAMMING THE STATION
3.1 Installing and programming the alarm station
3.1.1 System description
A. Panic LED
G. Keyboard
L. Mains adapter (not included)
B. Area 2 LED
H. Speaker (100dB)
M. Cable tray
C. Area 1 LED
I. Fixing slots
N. Metal mounting bracket
D. STATUS LED
J. Self-protection
O. Fixing screw
E. Low battery LED
K. Telephone socket
P. Battery cover
F. Microphone
LED
SOUND
Status
Area 1
Area 2
Panic
Battery installation
Long
beep
Turns on for
3 seconds
Frequency saturation
Alarm
Flashes 3 times
every 3 seconds
*1,*5
Triggering of the alarm
Alarm
*1, *2, *4, *5
Triggering of the self-protection
Alarm
*1,*2,*5
Panic Area or station
self-protection
Alarm
*1,*5
Low battery on accessories
Beep
Once per second
*3
Low battery on the station
Beep
3 times per
second *3
*1: During the alarm, the LED flashes one per second.
*2: The LED flashes depending on the area corresponding to the triggering.
*3: The low battery LED turns off when the system is in test mode.
*4: In chime mode, the station emits a "ding-dong".
*5: Triggering of the alarm occurs only when the station is armed whereas triggering in panic area or by the
self-protections occurs in any station mode (except in test mode).