Operation Manual

24
7. RESETTING THE STATION
You can reset the station to delete all accessories, the message, the phone numbers and the personal
code.
To reset the station:
- If possible, switch the station to test mode (see
page 18).
- Dismount the station from its location and open
the compartment at the rear panel of HA700.
- Remove the batteries.
- Move the jumper for reset.
Position to reset the station
- Wait 5 minutes.
- Put the batteries back into place, the station
beeps and the STATUS LED lights up for
3 seconds.
- Put the jumper back into its original position.
Default position
- Now close the compartment at the rear panel
of HA700.
- Mount back the station at its location.
Default setting
Arming mode
Disarmed
Personal code
1 2 3 4
Key beep
Active
Triggering mode
Siren/transmitter both active
Alarm delay
1 minute
Frequency saturation
Disabled
Entry delay of 15 seconds
Disabled