Operation Manual

10
4. Insert the 4 LR20 alkaline batteries.
5. Close the compartment at the rear panel of
HA700.
6. Connect the telephone cable
and fix it there to the metal bracket using the screw.
7. Mount the alarm station at this place.
Your alarm system is now ready
CHANGING THE STATION BATTERIES
When the station batteries need to be changed, the station will emit a beep every 30 seconds and the yellow LED
will flash.
To change the batteries:
- Switch the station to test mode (see page 18).
- Dismount the station from its location and open the compartment at the rear panel of HA700+.
- Change the batteries.
- Now close the compartment at the rear panel of HA700+ and mount back the station at its location.
- Exit the mode test (see page 18).