Operation Manual

Page 41
4.4.1 General Settings
Figure 4.12 General Settings
【System Time】Set DVR’s current system date and time；
【Date Format】Select the date display format: Y/M/D, M/D/Y, or D/M/Y；
【Date Separator】Select the separators in the date format；
【Time Format】Select 24 hour or 12 hour time format；
【Language】Currently support 14 languages：English, Finnish, French, German, Greek, Italian,
Japanese, Polish, Portuguese, Russian, Spanish, Thai, Chinese, and traditional
Chinese
【HDD Full】Select Stop: When the installed storage disk is full, it will stop recording；
Select Overwrite: When the installed storage disk is full, it will continue recording and
overwrite the oldest video files;
【DVR No.】To be used when multiply DVRs are controlled by one remote control, press the
address key on the remote control and input control address that matches the local
device serial number of corresponding DVR to enable remote operation；
【Video Standard】Support PAL and NTSC formats；
【Standby Time】To set in menu the standby time from 0-60. 0 indicates no setting for standby；
【Daylight Savings Time】Check off the Daylight Savings Time, then click Settings button to show
Figures 4.13 and 4.14. Set the start and end time of Daylight Saving Time by Week or
Date.