Operation Manual

Page 19
Playback button directly to perform Accurate Playback of the record searched;
Zoom In: When performing single-screen full screen playback, left click the mouse to select any
area on the screen. Left click the mouse again within the selected area to playback in zoom-in mode.
Right click the mouse to exit zoom-in.
3.5.3 Recording Control
Control recording on each channel. Highlighted “●” indicates the current recording status of the
channel. Playback page is accessible by either using desktop quick launch or entering 【Main Menu】>
【Recording Functions】>【Recording Setup】.
Figure 3.8 Recording Control
【Schedule】Record in accordance with the configuration parameters；
【Manual】Regardless of the current status of the channel, selecting “Manual” will start the recording
on the corresponding channel；
【STOP】Regardless of the current status of the channel, selecting “STOP” will stop the recording on
the corresponding channel；
3.5.4 Alarm Output
Control alarm output on each channel. Highlighted ■ indicates the presence of alarm output on
the channel. Alarm Output page is accessible by either using desktop quick launch or entering 【Main
Menu】>【Alarm Functions】>【Alarm Output】.