DASH CAM INSTRUCTIONS DVRCAR25
Includes with • Car Camera • Car Charger • USB Cable • Suction cup mount 14 15 5 1 2 3 7 8 9 10 11 4 12 5 6 1. Up button 6. Speaker 11. TF slot 2. Menu 7. Ok button 12. LED flash light 3. Down button 8. Mode button 13. Bracket hole 4. USB interface 9. Power button 14. Reset hole 5. Camera 10. Display screen 15.
1) Charging A) Using the built-in rechargeable lithium battery Charging options: 1) Connect the Dash Cam to the car charger; 2) Connect the dash cam to your computer using the USB cable - When charging through the car charger, the ‘battery’ display in the bottom right of the screen will flash – indicating that the unit is charging - A red light will illuminate on the left side of the Dash cam whenever the camera is charging (Note: For first charge a minimum of 6 hours is recommended) B) The Dash Cam connect
B) Still Photo mode: (A still photo camera icon will appear in the top left of the screen. Memory card must be inserted) After the device is powered on, press the OK button to stop recording. Once recording has been stopped, press the mode button once to enter still photo mode (Dash Cam cannot change modes while the camera is recording).
3) Instellingen Menu Each of the Dash Cam’s three modes has its own settings menu: Video Settings, Still Settings, Playback Settings. To access the settings menus from any mode: be sure the camera is NOT recording. To enter Video settings press the MENU button from video mode. To access Still settings, navigate to Still Photo mode and press the MENU button. To access Playback settings, navigate to Playback mode and press the MENU button.
Still settings: Timer: Single / 2s Timer / 5s Timer / 10s Timer Resolution: 12M (4032x3024) / 10M (3648x2736) / 8M (3264x2448) / 5M (2592x1944) / 3M (2048x1536) Sequence: On / Off Quality: Fine / Normal / Economy Sharpness: Strong / Normal / Soft White balance: Auto / Daylight / Cloudy / Tungsten / Fluorescent Color: Color / B&W / Sepia ISO: Auto / 100 / 200 / 400 EV Exposure Value: +2.0, +5/3, +4/3, +1.0, +2/3, +1/3, +0.0, -1/3, -2/3, -1.0, -4/3, -5/3, -2.
Setup Menu: In addition to the mode settings pages, from any mode you can access the Setup Menu by pressing the MENU button twice (camera must NOT be recording to access menus). Set Date/Time: Using the UP and DOWN buttons set the correct time and date.
