Operation Manual

Included in the box is a power cable that can be used to connect bell to a power supply as an alternative
for continuous battery mode. Connect the power cable to the power connection terminals on the rear of
the doorbell and using the cable connectors supplied connect this to your power supply MAX AC: 9V –
36V / DC: 12V- 30V.
Wired Connections
C2-C1 = 0v door/ gate contact controlled via the app using lock 2.
Any door lock / motor used here will require its own power supply. AC/DC:12~30V Max. 2A.
B2-B1 = Connection to wired doorbell system, allows a wired doorbell to be activated when the main
button is pressed. 02-01 = 12V door / gate contact with 12V 1A output.
Controlled via the app using lock 1 suitable for use with a door lock that requires additional voltage to
operate. This mode can only be used when the Wi-Fi doorbell is powered by an adaptor onto the power
connection terminals.