Operation Manual

7. On Wi-Fi setup click SET-UP.
8. Ensure your doorbell is still flashing blue and white and then click “Next”. If it is not flashing
blue and white, then press the power button twice to turn it back on.
9. Go to your phone Wi-Fi settings and select your required network from the list, then return to
the app to enter the password for the network.
If your phone only has one Wi-Fi network stored then this will already be shown. Enter the
password for the network.
10. Click “Next” in the app until you are prompted to connect to the RVDP Wi-Fi. Go to your
phone Wi-Fi settings and select the RVDP-xxxx network from the list, then enter the password
12345678.
11. Return to the Smartwares View app and click “Next”. Allow a few minutes for the phone to
complete the set-up.
12. Once connected, the doorbell will ring.