Instructions

System operation | 6
CMS-30100_IM 15
6.4 Record setup
The system can be set up to record video in different modes. It supports up to 4 separ-
ate schedules where each schedule can be set in different modes, using 1 or more in-
stalled cameras. See section “Record Schedule”.
To configure the record setup settings, do the procedure below.
a) From the main menu: Select “Record Setup”.
b) Select storage device. (This is only relevant if you have inserted a MicroSD card.)
c) Select “Storage Manage” to see the current memory use and format the MicroSD
card.
d) Select “Overwrite” to enable/disable the monitor to overwrite older recordings
when the memory runs out.
6.4.1 Record Schedule
Illustration27: Record Schedule
Illustration28: Schedule 1-4
Illustration29: Schedule settings
To make a recording schedule, do the procedure below.
a) From the main menu: Select “Record Setup”.
b) Select “Record Schedule”.
c) Select schedule 1-4.
d) Enable the selected schedule by moving the slider (it will turn green when en-
abled).
e) Select “channel” (cameras).
f) Select the “channel” (camera(s)) that you want to record from).
g) Select “Weekday”.
h) Select the days that you want to record on, from the list.
i) Select “Time” and insert the time frame of which you want to record.
Note: The “Type” only has one option (Enable motion alarm) and it is enabled by de-
fault.