Instructions

6 | System operation
12 CMS-30100_IM
Illustration14: Time Setup
Illustration15: Date Time Setup
(manual)
6.2.3 Wireless Internet
Do the procedure below to enable the wireless internet connection. This feature is op-
tional but it enables you to use the following features:
– App connectivity
– Time and date synchronization.
a) Make sure that you have an internet connected WIFI router, your password and
router name (SSID) available.
b) From the main menu: Select “System Setup”.
c) Select “Wireless Internet”.
d) Enable WLAN.
e) Select “Hotspot list”.
f) Find and select your wireless router.
g) Type your password.
ð NOTE: Only 2.4GHz networks are supported
h) Download the “SW360” app.
i) Open the app, register as a new user and follow the instructions given in the app.
6.2.4 Wireless Channel
Illustration16: Select Wireless
Channel
In some cases the range of the wireless signal can be obstructed by other wireless net-
works occupying the same channel. If you experience a lower range than expected,
changing the channel may provide a solution.
a) From the main menu: Select “System Setup”.
b) Select “Wireless Channel”.
c) Select “Wifi channel”.
d) Select a new channel. (The Wifi router is usually set to automatically detect the
channel. If not the channel must also be changed on the router manually).