Operation Manual

2
OVERVIEW
The outdoor camera which is equipped with powerful LED light illuminates. The light can be
switched on manually in the app or set to switch on when motion is detected. You can also control
the camera via the app remotely from anywhere.
* 1Mbps (upload/
download speed) is suggested.
the smart-mobile device(s) need to be on Wi-Fi or 4G mobile network
in order to receive maximum download speed.
* When the internet transmission is low, the app will automatically switch to Relay
Mode:
•
By adjusting to “Better Streaming” in the system setting section may improve
the APP performance.
* Your internet bandwidth is limited.
connecting to the camera simultaneously.
* 1.5GHz dual
core processor or equivalent is suggested.
* If the signal strength of your Wi-Fi router is weak, there are several ways to improve
transmission:
•
Change router/camera relative position to receive better signal.
•
Use wire Ethernet cable on the camera to establish connection between the
camera and your router.
•
Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi route.
•
Switch your router to 11b/11g mode in order to improve router service range.
* Please make sure the memory card used is CLASS10 rated.