Operating Instructions and Installation Instructions

20
SETUP PIN LOCK
If you enable PIN Lock, the user will be asked to enter the PIN code when you launch the APP.
1. Enable the “Enable lock when starting” function. Then enter your PIN code.
2. Conrm your PIN code again.
Note:
If you forgot your PIN code, please uninstall the APP and reinstall it on the mobile device.
NOTIFY (PUSH NOTIFICATION)
The C995IP camera supports motion detection function. When any event is detected in the
camera site, you’ll receive push notification on the mobile devices for the event recognized by the
camera.
For iOS
If you want to enable/disable it, please follow the steps on your iOS mobile device:
1. Launch Settings from your Home screen.
2. Tap Notifications.
3. Scroll down to find “Smartwares view” APP and tap
on it.
4. Switch the toggle to ON/OFF in Notification Center.
Note:
It takes time for the changes to take effect in iOS, normally within 2 hours.
(iOS) (Android)