Operation Manual

In most cases, you can successfully add the camera according to the steps above. However, the

camera will not nd the network if Wi-Fi router turns off the SSID broadcasting function. Please

enable the SSID broadcasting to complete the settings.

Note:

In soft AP mode, the GREEN LED long ashes once followed by 2 short ashes. In normal

mode, the LED is ashing in green.

Most Wi-Fi routers broadcast the Service Set Identifier (SSID) by default. This is the

name of your wireless network, and SSID broadcasting is how Wi-Fi-enabled devices nd

networks.

The camera will only accept SSID composed with English alphabet characters and Arabic

numbers. Non-English and special characters (!@#$%, etc.) will not be accepted.

If you fail to add the camera for several times, please press and hold the “Reset” button for

5 seconds to reset it.