User manual

【Time Display】 and 【Channel Title】 set the display position for Time Title and Channel Title.
4.4.6 PTZ Settings
Figure 4.32 PTZ Settings
【Channel】Select input channel for dome camera；
【Protocol】Select proper dome camera protocol for corresponding brand and model (e.g.：PELCOD)
【Address】Set address for the corresponding dome camera. The default is 1（Note：The address set
here must match the dome camera address or the dome camera cannot be controlled）；
【Baud Rate】 Select the dome camera baud rate to control PTZ and camera on the corresponding
channel. The default is 115200；
【Data Bits】Available options: 5-8. The default is 8 bits；
【Stop Bits】Two options are 1 and 2. The default is 1；
【Parity】Includes odd parity, even parity, parity flag, none parity. The default is None.
4.4.7 Serial Port Settings
Figure 4.33 Serial Port Settings
Page 49