User manual

Figure 4.10 Abnormality
【Event Type】 Select the exceptional event in the drop-down list for testing
【Enable】Highlight ■ to enable Exception Handling function. Settings can only be activated after
Enable is ticked;
【Screen Prompt】The on-screen alarm information prompt pops up on local display；
【Buzzer】 The device generates two long buzzer beeps when the alarm sounds.
4.4 System Settings
To set various function parameters in DVR: general settings, encoding settings, network settings,
network service, output modes, PTZ settings, serial port settings, and auto sequence settings.
4.4.1 General Settings
Figure 4.11 General Settings
【System Time】Set DVR’s current system date and time；
【Date Format】Select the date display format: Y/M/D, M/D/Y, or D/M/Y；
【Date Separator】Select the separators in the date format；
【Time Format】Select 24 hour or 12 hour time format；
【Language】Currently support 14 languages：English, Finnish, French, German, Greek, Italian,
Page 36