smart wireless alarm system COMPLETE APP CONTROLLED SECURE & MONITOR FAMILY HOUSE FAMILIENHEIM STORE GESCHÄFT LUXUSHAUS LUXURY HOME OFFICE BÜRO Check for news and new items: www.smartwaressafetylighting.
Manual 10.016.
Welcome to the world of our Smart Home Wireless Alarmsystem HA701IP We will guide you during the installationtrip; step by step! The trip will start with unpacking, sorting, screwing and downloading, and will be accompanied by screenshots, so that you see what you get! We wish you a pleasant trip! Step 1: Unpack all the products and sort them on the table! Step 2: 2.1 Write down the Access Code information of the back of the Gateway, on this field of the manual: ‐ ‐ ‐ The Code is needed for system login.
Step 3: Remove the insulating films on the back of the Motion Sensor and Magnetic Contact Sensor. Remove the insulating films on the side of remote. Step 4: Open on your computer again: www.mysecurity.smartwares.
Step 6: Confirm your country. Fill in your email adress which will also be your accountname. Fill in the password you want to use for this account. Confirm the password.
Step 8: The system will congratulate you, and askes which name you want to give your system.
Step 10: You are in the main menu of the system! Step 11: Connect and check the Motion Sensor, Magnetic Sensor and Remote! Click on "System" Step 12: We will now add the Sensors and the Remote!Click on "+ add a new device" 7
Step 13: Select the device you want to add, for example Remote, and click on it.
Step 15: You will get a confirmation that it is learned success full. When it is already connected, you will get the message that it is already known. Now you do the same for the Motion Sensor and the Magnetic Contact Sensor. All connected devices are shown in the screen.
Legend P.I.R. Detector Magnetic Switch Keypad Indoor Siren Outdoor Siren Smoke Detector Water Detector Bathroom Bedroom Bedroom Hall Bedroom Bedroom Livingroom Laundry Storage Kitchen Sauna Walk in closet Bedroom Bathroom Hall Study important: The PIR/Motion sensor has a battery saving mode! This means that the Motion Sensor is always ready for triggering.
Step 18: Personalising the System Settings; click on "Systems" Step 19: Click on: "Acount" Step 20: Here you can fill in, if you want, your personal data 11
Step 21: Close the account, and click on: "Security". Here you can define which detectors has to be armed in which mode! You have the opportunity to arm all detectors, or partial! For example: When you are at home you only arm the Magnet contacts on the outdoor. When you are goiing to sleep, you arm also the Motion sensors in the living, and the kitchen, but not upstairs.
Step 26: Now we have installed everything, and go for the more funny part! We are going to download and install our "MYSECURITY" - app in the Play- or Apple store, and will enter the Smartalarm world! Step 27: Open the app: In the app, you will see the same functions as you see on the web-site. Only the lay-out is different.
EN PRODUCT GUARANTEE This product has factory warranty according to EU regulations. Guarantee lasts for the number of years shown on the packaging, starting from the date of purchase. Keep the receipt - proof of purchase is required in order to rely on guarantee. In the case of problems, please contact with the store where you purchased the product. For further product information call to our Hotline or visit our website: www.smartwaressafetylighting.eu.
