Product Manual

Feature Overview
The Pro 3600 operates normally in a standard reference mode where level is displayed as
0.00°. However, a new reference point for 0.00° can easily be established by pushing the
ALT ZERO button. You can also "freeze" any displayed angle on the LCD by pushing
the HOLD button.
The 360° range of the unit is organized into four 90° quadrants for display purposes. Display
resolution is 0.01° near level (0.00° to 9.99°) and 0.1° at all other angles (10.0° to 90.0°).
And the Pro 3600 does not need to be returned to the manufacturer or dealer for recalibration.
By following the Superset
®
instructions in this booklet,you can test and recalibrate the Pro
3600 in just a couple of minutes on site and without any special fixtures.
2
ALT ZERO
indication
Liquid-crystal display (LCD)
Directional arrows
for level/vertical
ON/OFF button
HOLD button
ALT ZERO button
(alternate reference)
RS232 PORT (in back)