Product Manual

Pro 3600

Superset

- Vertical Settings

[5]

• Place unit against vertical surface so it faces you, the lettering on the face ("Pro

3600, etc.) should read from bottom to top.

• Align with an edge or line - wait 10 seconds.

• Press HOLD button until [ 5] appears.

[6]

• Roll the unit so it faces away from you, the lettering should still read from bottom

to top

• Align with same edge or line - wait 10 seconds

• Press HOLD button until [ 6] appears.

[7]

• Rotate unit end-for-end so it faces you, the lettering should now read top to bottom.

• Align with same edge or line - wait 10 seconds

• Press HOLD button until [ 7] appears.

[8]

• Roll the unit so it faces away from you, the lettering should still read top to bottom.

• Align with same edge or line - wait 10 seconds

• Press HOLD button. [ 8] will very briefly appear, followed immediately by regular

angle measuring.