Product Specs

SKEEPER Body, USB Charging Cable, Extra Accessory (Diaphragm),
User Guide (Each 1EA)
Before the initial use of the product, or when you have not used the product for
a long time, it is recommended to charge the product fully before use.
➊ Connect the USB charging cable, which is included in the product package, to the
product’s charging terminal.
➋ Connect the opposite side of the cable to the USB port where electricity is
supplied.
➌ Red LED is turned on during charging and Green LED is turned on when charging
is completed.
- When the product is discharged, it takes about one and a half hours to fully
charge. The charging time varies depending on the amount of remaining
power.
- The continuous use time of the product when the battery is fully charged is
about 8 hours.
※ Cautions
- Use a certified charger for safe use of the product.
- Charge the product regularly (every 3 months) for the life of the embedded
battery when you do not use the product for a long time.
- Product cannot be used during charging.
Remove the charging cable before use.
PRODUCT COMPONENTS
INTRODUCTION
CHARGING
PREPARATION
USB
connector
Volume(-)
Audio Jack
Battery LED
Power
Volume(+ )
Lung Mode
Heart Mode
Fetus Mode
Bluetooth(On/Off)
MFB:Multi Funtion Button
2524