User's Guide

Tamper switch

The tamper switch (lever

underneath the bracket)

will trigger an alarm

notification if an attempt

is made to remove the

hub from its installed

location. And the alarm

sounds.

Getting to Know Your System

All sensors are wirelessly connected to the hub. In the event of alarm activation, for

example, when a sensor is triggered, a push notification will be sent and an alarm call

will be made automatically to all registered users.

The system can be controlled on-site by the remote tag supplied, or remotely from

anywhere with our free dedicated mobile application.

The system can connect with up to 100 wireless sensors, 10 remote tags and 10 RFID

tags.

Smart Hub

Alarm, display, keypad and the brains of the system

Overview

RFID tag reader zone

Tap RFID tag here to

arm and disarm.

Power port (Micro USB)

Plug in the power cable here.

Speaker

For voice prompt

and the alarm.

Backup battery ON/OFF

Push to ON to turn on the

built-in backup battery.

Keypad

ARM, ARM STAY,

DISARM and DIAL

buttons. Keypad for

entering passcode,

setting, and more.

Display Window

Display system status, time, the alarm’s

information, menus, and more.

Status indicator

Indicates the ARM/DISARM/ARM STAY/ALARM status.

10:35:42

2019-06-05 Wednesday