User's Guide

Schedule

You can set an arm schedule and a disarm schedule to

arm or disarm the system automatically at a daily time.

Go to Menu>Timer>Arm Timer/Disarm Timer and enter

 Scroll to and tap ► to enable keypad, enter the Daily

Arm/Disarm time (in 24-hr) and tap √ to enter.

 Scroll to and tap ► toggle to ‘on’ to enable the schedule.

 Press √ to save your schedule.

Smart Hub Features

Battery backup

If the building has lost electrical power, Smart Hub includes a backup battery that will last for more

than 6 hours. So even if the power is out, Smart Hub can still detect when an intruder is in your home

and sound the alarm.

The battery icon in the upper-right corner shows the battery level or charging status, this level is just

for reference.

If the backup battery is very low, the battery icon turns red, and for up to 15 minutes before the hub

works well. And Low Battery notifications will be sent to the registered phone numbers.

The battery is fully charged within 8 to 12 hours.

Loss/Restoration of AC power

If the event of AC power loss or restoration, the hub will send you an alert notification to let you know

that.

Tamper detection

If someone tampers with Smart Hub and removes it from the back plate, the hub will send you an alert

notification to let you know that.

RESET TO FACTORY SETTINGS

You have two ways to reset Smart Hub to factory settings.

Go to Menu>Settings>Initialization> and enter, or press the TAMPER switch underneath the bracket

5 times.

Important: You won’t be able to reset if Smart Hub is locked. All the paired accessories and event logs

will be deleted when reset is done.

Arm Schedule

20:12