User's Guide

10
Tamper switch
Tamper switch (small black
lever underneath the bracket)
will trigger an alarm notification
If someone tampers the sensor
and removes it from its
installed location.
RFID Tag
RFID tag lets you arm or disarm without entering a password.
Door/Window Sensor
Door/window sensors are set to Stay Arm Active mode in default and are ideal for protecting
entry/exit locations, such as front/back doors and all windows. When the system is armed or home
armed and a sensor is triggered (magnet is separated from the sensor), a push notification including
the sensor name will be sent automatically to the registered users, and the alarm will sound.
LED Indicator
Lights up when door/window is
opened. And blinks in case of
low battery, please replace the
battery soon.
Top view
Inside view
Open-close magnet
Works with sensor to sense
when a door or window is
opened or closed.
Disarm with a tap
Tap and hold RFID tag on the RFID zone of your
panel to arm or disarm when you’re leaving and
coming home.
Battery receptacle
Contains one
CR2032 3V lithium
battery.
Power on/off
Slide it up to ‘ON’ to
power up the sensor.
Key loop
Attach to your key ring.
Setting/Panic Button
Press to send a transmission
signal to the hub for pairing or
alarm.
2
1
5
4
6
7
8
9
3
0
10:35:42
2019-06-05 Wednesday