Instruction Manual

21
PROBLEM CAUSE SOLUTION
No backlight.
The weather station
is only powered by
batteries.
1. Press "SNOOZE/LIGHT"
to temporarily activate the
backlight for 10 seconds.
2. Connect DC adapter to
power up the weather station,
the backlight will remain on.
DC adapter is
connected, but the
backlight is set to
"OUT" state.
Press "SNOOZE/LIGHT"
to adjust the backlight
brightness, out-medium-high.
No outdoor
temperature
displays on
the weather
station.
The batteries of the
sensor have run out.
Replace 2×AA new batteries
for the outdoor remote sensor.
The channel
displaying on the
weather station
is different from
the channel of the
remote sensor.
Adjust the channel of the
weather station or the sensor
to keep them paired.
Weather station:
Press "
"
to select a channel.
Sensor:
Switch the knob "1
2 3" inside the battery bay to
select a channel.
The weather station
did not receive
signals from the
outdoor sensor.
1. Long press "SENSOR"
on the back of the weather
station to search signals
again.
2. Press "TX" of sensor to
send signals.
The outdoor
temperature
on the
weather
station is
different from
that on the
sensor.
The remote sensors
are exposed to the
sun or rain.
Keep the wireless sensor
away from direct sunlight and
rain.
There is a delay
or interruption of
transmission.
1. Long press "SENSOR"
on the back of the weather
station.
2. Press "TX" of sensor to
send signals.
3. Wait for several hours to
see if the readings are close
or same.
If problem persists, please contact after-sales
support at: support@smartro.co.
The indoor
and outdoor
readings
are different
when putting
the two
devices
together.
Temperature range
in 50°F~104°F(10°C
~40°C), tolerance:
±0.9°F.
Other: ±2.7°F.
Humidity range in
30%~80%, tolerance:
±3%. Other: ±5%.
1. The difference is in a
normal range.
2. If the difference is beyond
the range, please please
contact after-sales support at:
support@smartro.co.
The forecast
displaying on
the weather
station is
different from
the real-time
weather.
The weather station
calculates the
weather forecast
for the next 12
hours based on the
barometric pressure
trend, which is not
the current weather.
Please refer to the real-time
weather.
15. Troubleshooting
22