Instruction Manual

15 16
10. Temperature & Humidity
10.1 °C/°F Selection
Weather station:
Press "°C/°F" button on the weather station to choose the
temperature display unit.
Sensor:
Open the battery compartment cover and press "°C/°F" button to
choose the temperature display unit on the sensor.
10.2 How to Set Temperature & Humidity Alert
Press "ALERT" on the back of the weather station to activate or
deactivate the temperature and humidity alert. The icon "
" will
appear or disappear on the screen.
Choose the channel you want to start setting the temperature and
humidity alert as follows:
●
Long press "ALERT" until "
"and the outdoor temperature are
ashing. Press "▲" or "▼" to set the required maximum outdoor
temperature. Press " ALERT" to conrm your setting.
●
When "
" and the outdoor temperature are ashing, press "▲"
or "▼" to set the required minimum outdoor temperature. Press
"ALERT" to conrm your setting.
●
When "
" and the outdoor humidity are flashing, press "▲"
or "▼" to set the required maximum outdoor humidity. Press
"ALERT" to conrm your setting.
●
When "
" and the outdoor humidity are ashing, press "▲" or
"▼" to set the required minimum outdoor humidity. Press " ALERT"
to conrm your setting.
●
When "
" and the indoor temperature are ashing, press "▲"
or "▼" to set the required maximum indoor temperature. Press
"ALERT" to conrm your setting.
●
When "
" and the indoor temperature are ashing, press "▲"
or "▼" to set the required minimum indoor temperature. Press
"ALERT" to conrm your setting.
●
When "
" and the indoor humidity are flashing, press "▲" or
"▼" to set the required maximum indoor humidity. Press "ALERT"
to conrm your setting.
●
When "
" and the indoor humidity are flashing, press "▲" or
"▼" to set the required minimum indoor humidity. Press "ALERT" to
conrm your setting.
●
If you want to set the alert values of the other 2 channels, please
press "
" to change the channel and repeat the steps above.
●
When the temperature or humidity reaches the set value of
the alert, "
" or " " and the temperature or humidity will start
ashing and a beep will arise for 5 seconds. Pressing any button
can temporarily stop the alarm, however "
" or " " will still keep
ashing on the screen. The alert will restart in one minute unless
it is deactivated or the temperature and humidity return to the set
range. To completely end the alarm, please press "ALERT".
●
If you want to measure the outdoor temperature, please place
the sensor outside away from direct sunlight and rain such as
under eaves or on a porch.