Instruction Manual WIRELESS WEATHER STATION Model: SC93 Time Moon Phase In & Out Temp In & Out Humidity Dual Alarm Weather Forecast °C/°F Selectable Snooze
Content 1. Preface.........................................................................................1 2. Attention.......................................................................................1 3. Package Content..........................................................................2 4. Product Specification...................................................................2 4.1 Color Weather Station..............................................................2 4.
● 1. Preface Do not place the product in places that are exposed to direct sunlight and high temperature such as radiator, electric heater, Thank you for choosing this device from SMARTRO. stove, etc. ● Keep the product away from strong electromagnetic waves, Before You Start Using It strong static electricity, or moisture and condensation. ● Make sure to read the instruction manual carefully.
Outdoor temperature measurement range: -40°C (-40°F) ~ +70°C ● (158°F) +70°C (158°F) ● Indoor humidity measurement range: 1%RH~99%RH ● Barometric pressure ● Maximum & minimum records ● Dual alarm with snooze function ● Air pressure trend ● Temperature/ humidity alert ● Moon phase ● Alternative 12/24 hour format ● Calendar ● °C/°F switchable ● Adjustable backlight display ● Low battery indicator ● Power supply: ● Outdoor humidity measurement range: 1%RH~99%RH Outdoor temperature measurement range: -40°
. Know Your Device 5.2 Main Unit 5.
. Preparation 5.3 Wireless Remote Sensor ● Open weather station battery compartment cover, insert 2 x AA batteries, ensure correct battery polarities [ "+" and "–" ]. And connect the DC adapter to power the weather station. ● The screen will light up, and the device will make a beeping sound. The weather station starts to detect indoor temperature and humidity.
the real-time weather condition outside. 7. Initial Time Setup ● Long press " " key for two seconds. ● The year display "2020" starts to flash. Press "▲" or "▼" to set ● Press " " to confirm your setting and complete the setup. Note: the correct year. During the setup, if there is no operation of buttons within 20 ● Press " " to confirm your setting. ● The month display starts to flash.
● Press and hold " " key for two seconds, the hour of alarm 1 ● When the snooze function is activated, press any button except starts to flash. "SNOOZE/LIGHT" to exit the snooze mode. ● Press "▲" or "▼" keys to set the required hour. ● Press " " to confirm your setting. ● The minute of alarm 1 starts to flash. Press "▲" or "▼" to set the ● If alarm 2 rings during the snooze mode of alarm 1, the snooze required minute.
Wireless Remote Sensor: outdoor readings will display from CH1 to CH3 automatically every —Select a same channel with the weather station for the remote 5 seconds. sensor. Open the battery compartment of the remote sensor to —To see the temperature and humidity on a fixed channel, just select channel with numbered knobs (1, 2, and 3). press " —Insert 2 x AA batteries in the remote sensor. The indicator outdoor readings will stop cycling. " button until " " disappears.
● If you want to measure the outdoor temperature, please place or "▼" to set the required maximum outdoor humidity. Press the sensor outside away from direct sunlight and rain such as "ALERT" to confirm your setting. under eaves or on a porch. ● When " " and the outdoor humidity are flashing, press "▲" or "▼" to set the required minimum outdoor humidity. Press " ALERT" 10. Temperature & Humidity to confirm your setting. 10.
values. At this time, "MAX" or "MIN" will disappear from the display Note: ● The temperature and humidity alerts of 3 channels can be set screen. separately. If any channel reaches the set value of the alert, the ● If not checking the maximum or minimum values, long pressing main unit will start ringing. " ● Note: In any case, if " " is displaying on the screen and the alert function is not needed, please press "ALERT" to clear it away.
. Moon Phase 14. Backlight When the calender has been set, the weather station will display 8 —Connect the weather station with DC adapter, the backlight will different moon phases: New moon, Waxing Crescent, First Quarter, always keep on. The backlight has 3 brightness levels, Bright- Full Moon, Waning Gibbous, Last Quarter, Waning Crescent, New Low-Out for selection. To adjust the backlight brightness, touch Moon. "SNOOZE/LIGHT" to choose a brightness that is comfortable for you.
15. Troubleshooting PROBLEM CAUSE The remote sensors Keep the wireless sensor are exposed to the away from direct sunlight and sun or rain. rain. SOLUTION 1. Press "SNOOZE/LIGHT" to temporarily activate the The weather station backlight for 10 seconds. is only powered by 2. Connect DC adapter to batteries. power up the weather station, No backlight. the backlight will remain on. DC adapter is connected, but the backlight is set to "OUT" state.
Please check the set alarms The time alarms and reset them or switch the function is activated. alarms to "OFF". The alarm The temperature rings unexpectedly or humidity alert is activated. The at night. temperature or humidity have reached alert range. The outdoor readings display occasionally on the clock. Reset the temperature or humidity alert range. Press "ALERT" on the back of the weather station to turn it off. 17.
After-sales Support : +1(323)287-5798 : support@smartro.co : http://bit.
