User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 98
3. Fill in the fields, using the information in the field description table below.
4. Click Apply/Save to save the settings.
The fields on this page are explained in the following table.
Field Name Description
Select SSID Select the SSID of the wireless network to which this security configuration will
apply.
WEP Encryption Select to enable Wired Equivalent Privacy (WEP) mode. Options are
Enabled
and
Disabled
.
Encryption Strength (
Appears when WEP Encryption is set to Enabled
) Select the length of the encryp-
tion method. Options are
128-bit
and
64-bit
. 128-bit is the more robust option for
security.
Current Network Key (
Appears when WEP Encryption is set to Enabled
) Select which of the four keys is
presently in effect.
Network Key 1-4 (
Appears when WEP Encryption is set to Enabled
) Enter up to four encryption
keys using the on-screen instructions to achieve the desired security strength (128-
bit or 64-bit).
802.1X Authentication
1. On the Wireless > Security page for the band that you want to configure, select 802.1X in the Network Authentication field.
The following fields appear.