User's Manual
Table Of Contents
- Welcome!
- Getting Familiar with your Gateway
- Installing your SR700ac Gateway
- Logging into your Gateway's UI
- Device Info
- Advanced Setup
- LTE WAN Service
- Wireless
- Diagnostics
- Management
- Logging Out
- Appendix: Compliance Statements
- Revision History
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 6
Connections
Below is a generic representation of a SmartRG gateway, Your specific model may have more or fewer ports and controls. Refer to
the Quick Start Guide enclosed with your gateway for specifics regarding installation of your particular model.
The ports depicted in this example are described below.
DSL
The grey RJ12 port labeled DSL is specifically intended for connection to an internet provider via a DSL (Digital Subscriber Line) ser-
vice. The center pair carries the first DSL line. For models like the SR550n equipped with two DSL ports and bonded DSL capability,
the outer pair carries the second line.
WAN
A stand-alone RJ45 port labeled WAN enables your SmartRG gateway to be hard-wired to another network device with a RJ45/Eth-
ernet output such as a cable, fiber, or DSL modem.