User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 66
QoS Port Shaping
QoS Port Shaping facilitates setting a fixed rate (Kbps) for each of the Ethernet ports.
1. In the left navigation bar, click Advanced Setup > Quality Of Service > QoS Port Shaping. The following page appears.
2. Fill in the fields, using the information in the table below.
3. Click Apply/Save to commit your changes.
The fields on this page are explained in the following table.
Field Name Description
Interface Each entry in this column represents one of the Ethernet LAN ports on
the gateway.
Type Each entry in this column identifies the function for which each physical
port is configured on the gateway.
Egress Shaping Rate (Kbps) Enter the data rate for packets on the specified Interface. Options are:
1
-
1,000,000
Kbps. The default is
-1
(no shaping).
Egress Burst Size (bytes Enter the burst size to be applied to packets in the defined queue.
Options are
1600 bytes
or greater. The default is
0
(no size limit).
If you enter a value of -1 (disabled) in the Egress Shaping Rate field, the
value in this field is ignored.
Ingress Policing Rate (Kbps) Enter data rate for policing incoming packets in the defined queue. The
default is
-1
(no policing).